Сист. плата SocketAM3 GigaByte GA-890FXA-UD7

CPU 1. Support for Socket AM3 processors: AMD Phenom™ II processor / AMD Athlon™ II processor Front Side Bus 5200 MT/s Chipset 1. North Bridge: AMD 890FX 2. South Bridge: AMD SB850 Memory 1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1) 2. Dual channel memory architecture 3. Support for DDR3 1866(OC)(Note 2)/1333/1066 MHz memory modules (Note 2) Audio 1. Realtek ALC889 codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for Dolby Home Theater 5. Support for S/PDIF In/Out 6. Support for CD In LAN 1. 2 x Realtek 8111D chip (10/100/1000 Mbit) 2. Support for Teaming 3. Support for Smart Dual LAN Expansion Slots 1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) (Note 3) 2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2) (Note 3) 3. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) (Note 4) (All PCI Express slots conform to PCI Express 2.0 Standard.) 4. 1 x PCI slot Multi-Graphics Technology 1. Support for 2-way/ 3-way/ 4-way ATI CrossFireX™ technology Storage Interface South Bridge: 1. 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices 2. Support for SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD * SATA3 RAID 0 4x and SATA3 2x performance are maximum theoretical values. Actual performance may vary by system configuration. GIGABYTE SATA2 Chip: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices 2. 2 x SATA 3Gb/s connectors supporting up to 2 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1, and JBOD JMicron JMB362 chip: 1. 2 x eSATA 3Gb/s connectors (eSATA/USB Comobo) on the back panel supporting up to 2 SATA 3Gb/s devices 2. Support for SATA RAID 0, RAID 1 and JBOD ITE 8720 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB South Bridge: 1. Up to 14 USB 2.0/1.1 ports (8 on the back panel, including 2 eSATA/USB Combo, 6 via the USB brackets connected to the internal USB headers) NEC D720200F1 Chip: 1. Up to 2 USB 3.0/2.0 ports on the back panel * USB 3.0 10x performance is a maximum theoretical value. Actual performance may vary by system configuration. IEEE 1394 T.I. TSB43AB23 chip 1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header) Internal I/O Connectors 1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 2 x SATA 3Gb/s connectors 6. 6 x SATA 6Gb/s connectors 7. 1 x CPU fan header 8. 2 x system fan header 9. 1 x North Bridge fan header 10. 1 x power fan header 11. 1 x front panel header 12. 1 x front panel audio header 13. 1 x CD In connector 14. 1 x S/PDIF In header 15. 1 x S/PDIF Out header 16. 1 x IEEE 1394a header 17. 3 x USB 2.0/1.1 headers 18. 1 x serial port header 19. 1 x parallel port header 20. 1 x clearing CMOS jumper 21. 1 x clearing CMOS button 22. 1 x power button 23. 1 x reset button Back Panel Connectors 1. 1 x PS/2 keyboard/ mouse port 2. 1 x optical S/PDIF Out connector 3. 1 x coaxial S/PDIF out connector 4. 2 x IEEE 1394a port 5. 6 x USB 2.0/1.1 ports 6. 2 x USB 3.0/2.0 ports 7. 2 x eSATA/USB Combo connectors 8. 2 x RJ-45 port 9. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) --------------------- (Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. (Note 2) To reach DDR3 1866MHz or above, you must install two memory modules and install them in the DDR3_3 and DDR3_4 memory sockets. (Note 3) The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/ PCIEX8_2 is populated. (Note 4) The default bandwidth for the PCIEX4_2 slot is x1. When it is configured to x4 mode, the onboard GSATA2_6, GSATA2_7, and IDE connectors will become unavailable because they share bandwidth with the PCIEX4_2 slot. (Refer to Chapter 2, “Integrated Peripherals” in manual for how to change the operating bandwidth for the PCIEX4_2 slot.) (Note 5) Whether the CPU/system fan speed control function is supported will depend on the CPU/ system cooler you install. (Note 6) Available functions in EasyTune may differ by motherboard model.